|
|
 |
- The
Super 450 is an aerosol can crusher
that automatically opens, empties,
crushes and ejects 450 aerosol
cans per hour.
- The
NEW Super 450 has an air/hydraulic
logic control system with fewer
parts, improved dependability!
- NEW
crushed can ejection to rear makes
automatic can feed available (as
shown in video below)
-
Processes
many different aerosol can sizes
with a wide range of can contents.
Separates liquid can content
from propellants, VOCs and other
gaseous components. Also handles
small paint cans. Removes and
captures 99% of can contents.
|
- Provides
an automatic processing cycle
that begins when the operator
inserts the can and closes the
door. These steps can also be
automated and auto feed of cans
is available.
- Utilizes
explosion proof piercing and crushing
systems that have proven themselves
on millions of paint cans and
pails.
-
Incorporates
a blower that pulls VOCs and
propellents from the crushing
compartment, crushed aerosol
can collection drum and liquid
collection drum. This makes
the 450 a permanent, total enclosure
when the blower is running.
|
|
|
|
|
|
| |
ELECTRICAL
REQUIREMENTS:
CRUSHER: One 115/230 volt, 20/10 amps,
single-phase dedicated circuit
COLLECTION SYSTEM: One 115/230 volt, 12/6
amps, single-phase dedicated circuit.
|
| |
CRUSHING
FORCE: 12,000 pounds |
| |
OPERATING
CYCLE TIME: 8
Seconds |
| |
CRUSHING
CHAMBER : Handles
cans from 2 to 12 inches tall and 1 1/2 to
3 inches in diameter. |
| |
DIMENSIONS:
70"w
x 65"d x 95"h |
| |
AIR
REQUIREMENTS : 8
cfm @ 90 psi - oiler, dryer and regulator
provided. |
| |
APPROXIMATE
SHIPPING WEIGHT: 1,800
lbs |
|
|
| |
Super
450 shown with optional automatic can feed
|
|
